Multi-channel Multi-tone audio frequency sinusoidal and noise signal generator is intended for adjusting and measuring parameters of audio equipment. Multi-Tone Sound Generator is a sound and signal generator with audio frequency.
Multi-Tone Sound Generator main features:
# Is for the setting and measuring parameters of audio equipment
# Works with 16 -, 24 - and 32 - bit sound cards with sampling rate up to 400 kHz
# Separate channels frequency, amplitude and phase controls.
# Up to eight independent oscillators per channel with separate frequency, amplitude and phase adjustment, with adjustable noise pad
# A step of frequency setting is 0.00001%; level - 0.001 dB; phase - 0.001 degree
# The minimum coefficient of nonlinear and intermodulation distortion, precision, stability and range of frequency are limited only by quality of the sound card
# The Sweep Frequency Mode with adjustable rate in linear or logarithmic time scale
# Multi Oscillators Sweep Frequency Mode
# Noise: white, pink (1 / f), Brownian (1/f2)
# Mode of amplitude modulation of a channel with another
# Real-time signal synthesis
# Possibility of inclusion of synthesized signals to hard disk
Multi-Tone Sound Generator Requirements:
# IBM PC or compatible with Pentium II processor or higher (Pentium III-1000 is recommended minimum)
# 16 MB RAM, the minimum for the program itself is
# VGA monitor with 256 colors
# Hard disk with 1 MB of free space. Additional space is required to store audio files
# Windows-compatible sound card: 16 - bit, 24 - bit or 32 - bit card only
# Mouse or other pointing device
# Sound card driver (supplied with sound card)
Multi-Tone Sound Generator limitations:
# The demo is fully functional, but the time of sounding is limited to 15 seconds after you click the Start button is limited.
What's new in Multi-Tone Sound Generator:
# Sine Burst Mode Added
Multi-Tone Sound Generator main features:
# Is for the setting and measuring parameters of audio equipment
# Works with 16 -, 24 - and 32 - bit sound cards with sampling rate up to 400 kHz
# Separate channels frequency, amplitude and phase controls.
# Up to eight independent oscillators per channel with separate frequency, amplitude and phase adjustment, with adjustable noise pad
# A step of frequency setting is 0.00001%; level - 0.001 dB; phase - 0.001 degree
# The minimum coefficient of nonlinear and intermodulation distortion, precision, stability and range of frequency are limited only by quality of the sound card
# The Sweep Frequency Mode with adjustable rate in linear or logarithmic time scale
# Multi Oscillators Sweep Frequency Mode
# Noise: white, pink (1 / f), Brownian (1/f2)
# Mode of amplitude modulation of a channel with another
# Real-time signal synthesis
# Possibility of inclusion of synthesized signals to hard disk
Multi-Tone Sound Generator Requirements:
# IBM PC or compatible with Pentium II processor or higher (Pentium III-1000 is recommended minimum)
# 16 MB RAM, the minimum for the program itself is
# VGA monitor with 256 colors
# Hard disk with 1 MB of free space. Additional space is required to store audio files
# Windows-compatible sound card: 16 - bit, 24 - bit or 32 - bit card only
# Mouse or other pointing device
# Sound card driver (supplied with sound card)
Multi-Tone Sound Generator limitations:
# The demo is fully functional, but the time of sounding is limited to 15 seconds after you click the Start button is limited.
What's new in Multi-Tone Sound Generator:
# Sine Burst Mode Added
Posts
0 Comments:
Post a Comment